Hayward Navigator Pro parts

The Navigator rides on shoes and steers with wings and flaps, and those are the parts that wear. Concrete and vinyl pools take different shoes.

Hayward Navigator

Before you order parts

  • Set the flow with the in-line gauge: the black disk sits between MIN and MAX. The regulator valve can lower suction but cannot raise a low reading.
  • Hose length: the farthest point plus two 4 ft sections.
  • The rear flap adjuster has three positions; II is the default.

Parts by maker number

Links go to Amazon listings that name the maker and carry the same part number. Rows without a link name the part so you can ask a pool store for it.

The product links here go to Amazon, and Which Pool Robot earns a commission on purchases made through them. How we choose and earn

Hayward Navigator parts
PartMaker numberNoteLink
Shoes, concrete, 4-pack (older number)AXV014PThe current number is AXV414PAmazon
Shoes, vinyl, 4-packAXV413PNo genuine Amazon listing found—
Wing kitAXV604WHPNo genuine Amazon listing confirmed—
Flap kit (2 flaps, front and rear springs)AXV434WHPNo genuine Amazon listing found—
Turbine kit (turbine and 2 bearings)AXV602PAmazon
Tune-up kitAXW350Sold by Hayward on Amazon; not in the maker parts listAmazon
Regulator valveV094PAmazon
Gear box assemblyAXV408P—
Pod kitAXV417WHP—

More part numbers

Other maker numbers: AXV062C medium turbine, AXV055P turbine bearings (2), AXV079VP medium turbine and spindle gear kit, AXV621DAT turbine and A-frame kit, AXV054FH float kit, AXVU016 skirt kit, AXV031B flap adjuster, AXV603 and AXV603A access cover (concrete and vinyl).

Aftermarket tune-up kits sold under AXW350 hold an AXV434WHP flap kit, two AXV604WHP wings and four AXV414P shoes. Hayward does not list the contents of its own kit.

Part numbers are from the maker's documents: manual or parts list.

The cleaner itself

If the body is cracked or the drive is worn past a kit, this is the current model.

Hayward Navigator Pro

Suction cleaner, shoes and wings

Hayward Navigator Pro

Hayward W3925ADC

A suction cleaner on shoes with wings and flaps, set with an in-line flow gauge. The concrete version is W3925ADC; vinyl pools take W3925ADV, which differs in its shoes.

Type
Suction, turbine, shoes
Setting
Flow gauge disk between MIN and MAX
Hose
10 × 4 ft, 40 ft
Pool
Inground, up to 20 × 40 ft
Warranty
See Hayward's current terms

Suits: Inground pools up to 20 by 40 ft with a floor-to-wall radius of 7 in or more.

Weigh: Hayward gives the warranty as 1, 2 or 3 years depending on the page. The regulator valve can lower suction but cannot raise a low reading.

View on Amazon